Mounting Plate - Roof Lift Off Panel Front Stowage

Mounting Plate - Roof Lift Off Panel Front Stowage

Removal Procedure




1. Remove the roof front stowage bracket by twisting the egg shaped bracket 90 degrees clockwise.
2. Remove the bezel from the roof front stowage bracket mounting plate by prying up the bezel.




3. Remove the floor carpet to access the mounting plate bolts.




4. Remove the bolts attaching the roof front stowage bracket mounting plate.
5. Remove the roof front stowage bracket mounting plate.

Installation Procedure




1. Position the mounting plate to the rear compartment floor.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the bolts attaching the mounting plate.

1. Install the rear inboard bolt first.
2. Install the rear outboard bolt second.
3. Install the forward bolt third.

Tighten the roof stowage bracket mounting plate bolts to 8 N.m (71 lb in).




3. Install the floor carpeting.




4. Snap the bezel onto the ribs on the mounting plate. Press firmly around the entire periphery of the bezel.
5. Install the stowage bracket. Rotate the egg shaped bracket 90 degrees counterclockwise to secure the bracket.