Trim Replacement - Lock Pillar (Lower Convertible and Hard Top)

Trim Replacement - Lock Pillar (Lower Convertible and Hard Top)

Removal Procedure




1. Remove the sill plate.
2. Pull the lock pillar trim panel with retainers from the lock pillar and the side rail.




3. Slide the lower lock pillar trim out from under the upper lock pillar trim panel (convertible), rear side panel (hard top).
4. Separate the trim panel from the seat belt.
5. Remove the lock pillar trim.

Installation Procedure




1. Route the seat belt through the lock pillar trim panel.
2. Position the lower lock pillar trim panel under the upper lock pillar trim panel (convertible), side trim panel (hard top).
3. Install the foam insulator behind the lock pillar trim.
4. Position the lock pillar trim panel retainers to the holes in the lock pillar and the side rail.




5. Push in on the panel securing the retainers.
6. Install the sill plate.