Trim Replacement - Lock Pillar (Upper Convertible)

Trim Replacement - Lock Pillar (Upper Convertible)

Removal Procedure




1. Open the upper guide bolt cover by prying up at the belt side of the cover.
2. Remove the nut attaching the upper guide to the seat belt guide bracket stud.
3. Remove the seatbelt upper guide from the stud.




4. Remove the spacer and washer from the stud.
5. Remove the screw attaching the lock pillar upper trim.
6. Remove the upper trim.

Installation Procedure




1. Install the lock pillar upper trim.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the screw securing the upper trim to the lock pillar.

Tighten the lock pillar upper trim screw to 1.8 N.m (16 lb in).

3. Install the spacer and washer to the seat belt guide stud.




4. Install the upper seat belt guide.

Tighten the upper guide nut to 40 N.m (29 lb ft).