Backup Lamp Switch: Service and Repair

Backup Lamp Switch Replacement
Removal Procedure





1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the catalytic converter.
3. Disconnect the backup lamp switch electrical connector.





4. Remove the backup lamp switch.

Installation Procedure

Notice: Refer to Fastener Notice in Service Precautions.





1. Install the backup lamp switch.
^ Tighten the backup lamp switch to 20 Nm (15 ft. lbs.).





2. Connect the backup lamp switch electrical connector.
3. Install the catalytic converter.
4. Lower the vehicle.