Front

REMOVAL PROCEDURE




1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the front fascia lower close out panel.
3. Release the brake caliper cooling duct from the front fascia and position the duct aside.




4. Disconnect the front fog lamp electrical connector from the fog lamp bulb/socket.

CAUTION: Refer to Halogen Bulb Caution in Service Precautions




5. Remove the fog lamp bulb/socket from the fog lamp.
Rotate the fog lamp bulb/socket counterclockwise to release it from fog lamp.

INSTALLATION PROCEDURE

CAUTION: Refer to Halogen Bulb Caution in Service Precautions.




1. Install the fog lamp bulb/socket to the fog lamp. Rotate the fog lamp bulb/socket clockwise to secure it to the fog lamp.




2. Connect the front fog lamp electrical connector to the tog lamp bulb/socket.




3. Position the brake caliper cooling duct to the front fascia, and press to secure.
4. Install the front fascia lower close out panel.
5. Lower the vehicle.
6. Check and adjust fog lamp aim as necessary. Refer to Fog Lamp Aiming Procedure