Tail/Turn Signal Lamp Replacement (Europe, Japan)

REMOVAL PROCEDURE




1. Remove the screws retaining the tail/turn signal lamp assembly to the rear fascia.
2. Remove the lamp from the fascia to gain access to the tail and turn signal lamp sockets.
3. Remove the sockets from the lamp assembly.
4. Remove the bulbs from the sockets, if replacing the bulbs.
5. Remove the lamp from the vehicle.

INSTALLATION PROCEDURE




1. Install the bulbs to the lamp sockets, if replacing the bulbs.
2. Install the sockets to the lamp assembly.
3. Position the tail/turn signal lamp assembly to the rear fascia.

NOTE: Refer to Fastener Notice in Service Precautions.

4. Install the tail/turn signal lamp screws to the rear fascia.

Tighten
Tighten the tail/turn signal lamp screws to 2 N.m (18 lb in).