Generator Brace Replacement

REMOVAL PROCEDURE




1. Remove the generator rear brace nut (5).
2. Remove the generator rear brace bolt (3).
3. Remove the generator rear brace (4).

INSTALLATION PROCEDURE




1. Install the generator rear brace (4).
2. Install the generator rear brace bolt (3).
3. Install the generator rear brace nut (5).

NOTE: Refer to Fastener Notice in Service Precautions.

4. Tighten the generator bolt and nut in the following sequence:

Tighten
4.1. Tighten the generator rear brace bolt (3) to 50 N.m (37 lb ft).
4.2. Tighten the generator rear brace nut (5) to 50 N.m (37 lb ft).