Defroster Door Replacement

REMOVAL PROCEDURE




1. Remove the HVAC module. Refer to Heater/Vent Module Replacement.
2. Remove the HVAC module screws.
3. Separate the HVAC module.
4. Remove the mode actuator screws.
5. Remove the mode actuator (3).
6. Remove the mode actuator cam assembly (4).
7. Remove the defroster door lever (2).
8. Remove the defroster door (1).

INSTALLATION PROCEDURE




1. Install the defroster door (1).
2. Install the defroster door lever (2).
3. Install the mode actuator cam assembly (4).
4. Install the mode actuator (3).
5. Install the mode actuator screws.

NOTE: Refer to Fastener Notice in Service Precautions.

6. Install the mode actuator screws.

Tighten
Tighten the screws to 1.6 N.m (14 lb in).

7. Install the HVAC module halves.
8. Install the screws to the HVAC module.

Tighten
Tighten the screws to 1.6 N.m (14 lb in).

9. Install the HVAC module. Refer to Heater/Vent Module Replacement.