Operation CHARM: Car repair manuals for everyone.

Trunk / Liftgate Striker: Service and Repair

STRIKER REPLACEMENT - MIDGATE

REMOVAL PROCEDURE




1. Fold down the rear seats.
2. Remove the rear removable glass panel.
3. Open the midgate to gain access to the striker.
4. Remove the striker bolts.
5. Remove the striker from the vehicle.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.

IMPORTANT: Ensure the mounting surface on the body is cleaned and free of any debris.




1. Install the striker.

Tighten
Tighten the striker bolts to 9 N.m (80 lb in).

2. Close the midgate.
3. Inspect for correct operation of the midgate.
4. Install the rear removable rear glass.
5. Return the rear seat to the upright position.