Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
82. Engine Coolant Air Bleed Pipe Installation
Coolant Air Bleed Pipe Installation
Important: Install the pipe gaskets properly onto the pipe and covers.
Position the gasket O-ring seal onto the nipple portion of the pipe.
1. Install the gaskets onto the engine coolant air bleed pipe and covers.
2. Install the pipe (2) and gaskets (3) onto the cylinder heads.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the pipe bolts (1).
Install the two pipe studs to the front of the engine.
- Tighten the pipe bolts to 12 Nm (106 lb in).
4. Install the covers (2), gaskets (3), and bolts (1) onto the rear of the engine.
- Tighten the cover bolts to 12 Nm (106 lb in).
5. Install the hose and clamp (1) onto the pipe (2).