Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously

HVAC Control Assembly Replacement - Rear Auxiliary

REMOVAL PROCEDURE

1. Separate the front of the console (1) from the headliner.
2. Push the assembly rearward and pull down in order to access the retaining tabs.
3. Remove the HVAC control assembly (2) by releasing the tabs at the rear of the control and push out from the rear.
4. Disconnect the electrical connector (3).

INSTALLATION PROCEDURE

1. Connect the electrical connector (3).
2. Install the HVAC control assembly (2) to the console (1).
3. Install the console (1) to the headliner.
4. Calibrate the HVAC module actuators. Refer to Re-Calibrating Actuators in HVAC Systems - Automatic.