Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
14. Oil Pump Removal
^ Tools Required- J 37789-A Oil Pump Remover and Installer
- J 39119 Oil Pump Remover and Installer Adapter
1. Remove all pump bolts (2).
2. Install J 39119 over stator shaft until it locks under splines.
3. Install J 37789-A.
4. Tighten the bolt (1) with a wrench. This will tighten the J 37789-A around the J 39119.
5. Turn the T-handle on top of J 37789-A.
6. Lift the pump out of the case.
7. Remove the pump cover to case gasket (6).