Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
19. Low and Reverse Clutch Piston Removal
^ Tools Required- J 23327-1 Clutch Spring Compressor
- J 34627 Snap Ring Remover and Installer
- J 42628 Disc
1. Install the J 23327-1 and the J 42628.
2. Tighten the J 23327-1.
3. Remove the low and reverse clutch retainer ring (693) using the J 34627.
4. Remove the low and reverse clutch spring assembly (694).
5. Blow compressed air into the case passage to remove the low and reverse clutch piston (695).
^ (1) LO Feed Passage
^ (2) REV Feed Passage