Impact Bar Replacement - Front Bumper (Monte Carlo)

Impact Bar Replacement - Front Bumper (Monte Carlo)

Removal Procedure




1. Remove the front bumper fascia.
2. Remove the front bumper energy absorber.
3. Remove the wiring harness from the rear of front bumper impact bar.




4. Remove the front bumper impact bar bolts.




5. Remove the front bumper impact bar.

Installation Procedure




1. Install the front bumper impact bar to the body.






Notice: Refer to Fastener Notice in Service Precautions.

Important: The upper right hand location is a net hole locator and must be installed first.

2. Install the front bumper impact bar bolts.

Tighten the front bumper impact bar bolts to 25 N.m (18 lb ft).




3. Install the wiring harness to the rear of the front bumper impact bar.
4. Install the front bumper energy absorber.
5. Install the front bumper fascia.