Wiring Harness Replacement - Front Door

Wiring Harness Replacement - Front Door (Monte Carlo)

Removal Procedure




1. Remove the front door trim panel.
2. Remove the front door water deflector.
3. Remove the front door rubber conduit from the windshield pillar.
4. Pull out the Harness connector from inside the pillar and disconnect the connector from the body harness.
5. Disconnect the front door wiring harness connectors from all of the accessories.
6. Disconnect the front door wiring harness rosebud retainers from the inner front door panel.
7. Remove the front door wiring harness from the front door.

Installation Procedure




1. Install the front door wiring harness to the front door.
2. Connect the front door wiring harness rosebud retainers to the inner front door panel.
3. Connect the front door wiring harness connectors to all of the accessories.
4. Connect the connector to the body harness.
5. Install the front door rubber conduit to the front door.
6. Install the front door water deflector.
7. Install the front door trim panel.