Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Power Accessory Port Replacement - Front Floor Console
TOOLS REQUIREDJ 42059 Cigarette Lighter Socket Remover
REMOVAL PROCEDURE
1. Remove the power accessory port fuse.
2. Remove the power accessory port socket by placing one side of the "T" portion of J 42059 into the tab window. Angle the other side into the opposite tab window. Pull the power accessory port socket straight out.
3. Remove J 42059 from the power accessory port socket.
4. Disconnect the electrical connector from the power accessory port.
5. Using your index finger, pull out the power accessory port retainer.
INSTALLATION PROCEDURE
1. Position the power accessory port retainer with J 42059 to the slot in the power accessory port hole.
2. Install the power accessory port retainer by pressing the retainer into place until fully seated.
3. Connect the electrical connector to the power accessory port.
4. Position the power accessory port to the retainer.
5. Install the power accessory port into the front floor console, pressing the port into place until fully seated.
6. Install the power accessory port fuse.
7. Inspect the power accessory port for proper operation.