Assist Handle Replacement - Rear

Assist Handle Replacement - Rear

Removal Procedure




1. Pull down on the assist handle.
2. Use a small, flat-bladed tool to remove the plastic cover.
3. Remove the assist strap screws (2).
4. Remove the assist strap from the vehicle.

Installation Procedure




1. Install the assist strap to the vehicle.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the assist strap screws (2).

Tighten the screws to 2 N.m (18 lb in).

3. Install the plastic cover. Press the cover into place until fully seated.
4. Return the handle to the original position.