Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or
click to submit anonymously
To Close
To close the power sunroof, turn the ignition ON, engine OFF, and from the any position press and hold the sunroof switch forward, this will apply the sunroof switch low reference to the sunroof close signal circuit
5 volt reference input to drop to
0 volts. The sunroof switch close signal input to the sunroof module needs to have a constant
0 volts applied to allow the motor to continue to drive the sunroof glass past the vent position until it reaches the closed position. The sunroof glass will soft stop at the closed position based on the inputs from the limit switches. The wind deflector will retract prior to the glass reaching the fully closed position. To close the sunshade, this will have to be manually slid closed.