Operation CHARM: Car repair manuals for everyone.
Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)

Ignition Coil: Service and Repair

IGNITION COIL(S) REPLACEMENT

REMOVAL PROCEDURE




1. Turn OFF the ignition
2. Note the position of the spark plug wires for the installation and disconnect the spark plug wires from the ignition coils (2).
3. Remove the 2 screws (1) securing the ignition coil (2) to the ignition control module (3).
4. Remove the ignition coil (2).

INSTALLATION PROCEDURE




1. Install the ignition coil (2) on the ignition control module (3).

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the 2 attaching screws (1).

Tighten
Tighten the screws to 4.5 N.m (40 lb in).




3. Connect the spark plug wires as noted during the removal.