Left Front

REMOVAL PROCEDURE




1. Remove the seat belt anchor nut from the seat stud.




2. Remove the seat belt (2) from the seat belt guide (1) through the slit in the guide.




3. Open the seat belt guide loop cover.
4. Remove the seat belt guide loop bolt.
5. Remove the seat belt guide loop from the inner upper quarter.




6. Remove the rear quarter lower trim panel.
7. Remove the trim cover from the rear quarter lower trim panel.
8. Remove the seat belt through the opening in the rear quarter lower trim panel.




9. Remove the bolt from the seat belt retractor.
10. Remove the seat belt retractor from the rear quarter inner panel.
11. Pull back the carpet.




12. Remove the bolt from the seat belt anchor.
13. Remove the seat belt from the vehicle.

INSTALLATION PROCEDURE




1. Install the seat belt anchor to the vehicle

NOTE: Refer to Fastener Notice Service Precautions.

2. Install the anchor bolt to the seat belt buckle.

Tighten
Tighten the anchor bolt to 42 N.m (31 lb ft).

3. Return the carpet to the original position.




4. Install the seat belt retractor to the rear quarter inner panel.
5. Install the bolt to the seat belt retractor.

Tighten
Tighten the seat belt retractor bolt to 68 N.m (50 lb ft).




6. Install the seat belt through the opening in the rear quarter lower trim panel.
7. Install the trim cover to the rear quarter lower trim panel.
8. Install the rear quarter lower trim panel.




9. Position the guide loop to the rear quarter inner panel.
10. Install the guide loop bolt.

Tighten
Tighten the guide loop bolt to 42 N.m (31 lb ft).

11. Close the seat belt guide loop cover.




12. Install the seat belt anchor nut to the seat stud.

Tighten
Tighten the nut to 42 N.m (31 lb ft).