- Symptoms - Automatic Transmission Shift Lock Control

Symptoms - Automatic Transmission Shift Lock Control

Important: The following steps must be completed before using the symptom tables.

1. Perform the Diagnostic System Check - Automatic Transmission Shift Lock Control before using the Symptom Tables in order to verify that all of the following are true:
^ There are no DTCs set.
^ The control modules can communicate via the serial data link.
2. Review the system operation in order to familiarize yourself with the system functions.

Visual/Physical Inspection
^ Inspect for aftermarket devices, which could affect the operation of the BCM.
^ Inspect the easily accessible or visible system components for obvious damage or conditions, which could cause the symptom.

Intermittent
Faulty electrical connections or wiring may be the cause of intermittent conditions.

Symptom List
Refer to a symptom diagnostic procedure from the list in order to diagnose the symptom:
^ Shift Lever Does Not Move with Brake Pedal Depressed. Shift Lever Does Not Move With Brake Pedal Depressed
^ Shift Lever Can Be Moved without Brake Pedal Depressed. Shift Lever CAN Be Moved Without Brake Pedal Depressed