TCC Pulse Width Modulation (TCC PWM) Solenoid Replacement

Removal Procedure





1. Remove the case side cover.
2. Disconnect the torque converter clutch pulse width modulation (TCC PWM) solenoid electrical connector.
3. Remove the TCC PWM solenoid retaining clip (314F).
4. Remove the TCC PWM solenoid (334).

Installation Procedure





1. Install the TCC PWM solenoid (334).
2. Install the TCC PWM solenoid retaining clip (314F).
3. Connect the TCC PWM solenoid electrical connector.
4. Install the case side cover.