Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2002 >> S10/T10 Blazer 2WD V6-4.3L VIN W >> Repair and Diagnosis >> Heating and Air Conditioning >> Control Module HVAC >> Service and Repair >> HVAC System - Automatic >> Blower Motor Control Processor Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the logical successor to CHARM, I recommend you try it!

Link: lemon-manuals.la

Blower Motor Control Processor Replacement

REMOVAL PROCEDURE




1. Disconnect the pigtail harness connectors (1, 2) from the blower motor.




2. Disconnect the electrical connector (4) from the blower motor control processor (2).
3. Remove the blower motor control processor mounting screws (1).
4. Remove the blower motor control processor (2) from the blower case.

INSTALLATION PROCEDURE




1. Install the blower motor control processor (2) to the blower case.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the blower motor control processor mounting screws (1).

Tighten
Tighten the screws to 1.9 N.m (17 lb in).

3. Connect the electrical connector (4) to the blower motor control processor (2).




4. Connect the pigtail harness connectors (1 and 2) to the blower motor.

pro multis · About Operation CHARM