Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2002 >> S10/T10 Blazer 2WD V6-4.3L VIN W >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Knock Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the logical successor to CHARM, I recommend you try it!

Link: lemon-manuals.la

Knock Sensor: Service and Repair

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.




1. Disconnect the negative battery cable.
2. Remove the distributor.
3. Remove the fuel pipes.
4. Disconnect the knock sensor harness connector (3).
5. Remove the knock sensor retaining bolt (1).
6. Remove the knock sensor (2).

INSTALLATION PROCEDURE

NOTE: Refer to Component Fastener Tightening Notice in Service Precautions.




1. Install the knock sensor (2) and bolt (1).

Tighten
Tighten the sensor to 25 N.m (18 lb ft).

2. Connect the knock sensor harness connector (3).
3. Install the fuel pipes.
4. Install the distributor.
5. Connect the negative battery cable.
pro multis · About Operation CHARM