Strut / Shock Tower: Specifications
| Front | Strut Lower Nuts-at Knuckle This is a prevailing torque type fastener. This fastener may be reused ONLY if: The fastener and its counterpart are clean and free from rust. (Note contiues in next cell) | 90 ft. lbs. The fastener develops a specified amount of torque (drag) against its counterpart prior to the fastener seating If the fastener does not meet these criteria, REPLACE the fastener. |
| Strut Shaft Nut This is a prevailing torque type fastener. This fastener may be reused ONLY if: The fastener and its counterpart are clean and free from rust. (Note contiues in next cell) | 63 ft. lbs. The fastener develops a specified amount of torque (drag) against its counterpart prior to the fastener seating If the fastener does not meet these criteria, REPLACE the fastener. | |
| Strut Upper Nuts | 30 ft. lbs. |