Ball Joint
| Front | Ball Stud Castle Nut-Lower Control Arm | 40 ft. lbs. |
| Ball Stud Nuts-Replacement Ball Joint This is a prevailing torque type fastener. This fastener may be reused ONLY if: The fastener and its counterpart are clean and free from rust. (Note continues in next cell) | 50 ft. lbs. The fastener develops a specified amount of torque (drag) against its counterpart prior to the fastener seating If the fastener does not meet these criteria, REPLACE the fastener. | |
| Rear | Ball Joint Nut | 44 ft. lbs. |
| Wear Limit | See Note "Information not suppled by the manufacturer" |