Fog/Driving Lamp Switch: Service and Repair

FOG LAMP SWITCH REPLACEMENT - FRONT

REMOVAL PROCEDURE

Location View:

1. Remove the instrument panel accessory trim plate to access the fog lamp switch.
2. Release the retainers on the fog lamp/dimmer switch housing using a small flat-bladed tool.
3. Remove the fog lamp/dimmer switch (3) housing from the instrument panel accessory trim plate.
4. Release the retainers on the fog lamp switch using a small flat-bladed tool.
5. Remove the fog lamp switch from the fog lamp/dimmer switch (3) housing.

INSTALLATION PROCEDURE

Location View:

1. Install the fog lamp switch to the fog lamp/dimmer switch housing, pressing into place until fully seated.
2. Install the fog lamp/dimmer switch (3) housing to the instrument panel accessory trim plate, pressing into place until fully seated.
3. Install the instrument panel accessory trim plate.