Ignition Coil: Service and Repair

REMOVAL PROCEDURE




1. Disconnect the negative battery cable.

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.




2. Remove the fuel rail cover.




3. Disconnect the ignition coil harness connector.
4. Disconnect the spark plug wire at the ignition coil.
5. Remove the ignition coil mounting bolts.
6. Remove the ignition coil.

INSTALLATION PROCEDURE




1. Install the ignition coil.
2. Install the ignition coil mounting bolts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the ignition coil mounting bolts to 12 N.m (106 lb in).

3. Connect the spark plug wire at the ignition coil.
4. Connect the ignition coil harness connector.

Tighten
Tighten the harness bolt to 12 N.m (106 lb in).




5. Install the fuel rail cover.
6. Connect the negative battery cable.
7. Program the transmitters. Refer to Transmitter Programming in Keyless Entry.