Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
85. Throttle Body Installation
Throttle Body InstallationNotice: Refer to Fastener Notice in Service Precautions.
1. Install the throttle body studs, if required.
- Tighten the throttle body studs to 6 Nm (53 inch lbs.).
Important: DO NOT use the throttle body gasket again. Install a NEW gasket during assembly.
2. Install the throttle body gasket (1) to the intake manifold.
3. Install the throttle body and nuts.
- Tighten the throttle body nuts to 10 Nm (89 inch lbs.).
4. Install the engine coolant air bleed hose and clamp to the throttle body.