Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2003 >> Impala V6-3.4L VIN E >> Repair and Diagnosis >> Heating and Air Conditioning >> Blower Motor Resistor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Blower Motor Resistor: Service and Repair

BLOWER MOTOR RESISTOR ASSEMBLY REPLACEMENT

REMOVAL PROCEDURE
1. Remove the right side instrument panel insulator




2. Disconnect the electrical connector from the blower motor resistor.




3. Disconnect the electrical connector from the blower motor.




4. Loosen both screws to the forward blower motor resistor.

IMPORTANT: The blower motor resistor opening is slotted. Access is extremely limited.

5. Remove the rear screw to the blower motor resistor.
6. Remove the blower motor resistor.

INSTALLATION PROCEDURE




1. Install the blower motor resistor.

IMPORTANT: Align the blower motor control processor forward retaining slots onto screws and seat the blower motor control processor against the HVAC module.

2. Install the rear screw to the blower motor resistor.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten all screws to 1.5 N.m (13 lb in).




3. Connect the electrical connector to the blower motor.




4. Connect the electrical connector to the blower motor resistor.
5. Install the right side instrument panel insulator.
pro multis · About Operation CHARM