Service Port HVAC: Service and Repair
SERVICE PORTS REPLACEMENTTOOLS REQUIRED
J 39037 Charge Valve Octagon Socket
REMOVAL PROCEDURE
1. Remove the service port cap.
2. Recover the refrigerant.
3. Use the J 39037 to remove the service port.
INSTALLATION PROCEDURE
1. Replace the O-ring.
2. Install the service port valve.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the valve to 11 N.m (98 lb in).
3. Evacuate and charge the system.
4. Leak test the A/C service port.
5. Install the service port cap.