Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2003 >> Impala V6-3.4L VIN E >> Repair and Diagnosis >> Power and Ground Distribution >> Fuse Block >> Service and Repair >> Junction Block Replacement - Accessory Wiring
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Junction Block Replacement - Accessory Wiring

JUNCTION BLOCK REPLACEMENT - ACCESSORY WIRING

REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the left instrument panel (I/P) insulator.




3. Remove the screws from the accessory wiring junction block.
4. Adjust the junction block for access.
5. Remove the circuit breakers (4) and the relays from the junction block as required.
6. If necessary remove the junction block from the bracket assembly.

INSTALLATION PROCEDURE




1. If necessary install the junction block to the bracket assembly.
2. Install the circuit breakers (4) and the relays to the junction block as required.
3. Position the junction block to the I/P carrier.
4. Install the junction block screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the screws to 10 N.m (89 lb in).

5. Install the left I/P insulator.
6. Connect the negative battery cable.
pro multis · About Operation CHARM