Bezel Replacement

Door Handle Bezel Replacement

Removal Procedure




1. Remove the door handle bezel screw (1) from the door handle bezel (2).
2. Remove the door handle bezel (2) from the trim panel by lifting out at the front.




3. Remove the power door lock switch (2) from the door handle bezel (3) by releasing the retaining tabs.
4. Disconnect the electrical connector (1) from the power door lock switch (2).

Installation Procedure




1. Connect the electrical connector (1) to the power door lock switch (2).
2. Install the power door lock switch (2) to the door handle bezel (3).
Press the switch (2) into the bezel (3) until the retaining tabs are engaged.




3. Install the door handle bezel (2) to the trim panel by engaging the tabs.

Notice: Refer to Fastener Notice in Service Precautions.

4. Install the door handle bezel screw (1) to the door handle bezel (2).

Tighten the screw to 2.3 N.m (20 lb in).