Steering Column Filler Replacement

Steering Column Filler Replacement

Removal Procedure




1. Remove the instrument panel (I/P) fuse block access hole cover.
2. Disengage the left I/P insulator retainers from the lower I/P trim pad.
3. Remove the steering column filler panel bolts.
4. Pull the steering column filler panel rearward to disengage the retainers. Lower the filler panel away from the I/P lower trim panel.
5. Disconnect the electrical connector from the rear compartment release switch.
6. Remove the rear compartment release switch.
7. Remove the steering column filler panel.

Installation Procedure




1. Install the rear compartment release switch.
2. Connect the electrical connector to the rear compartment release switch.
3. Align the steering column filler panel to the I/P lower trim panel. Press the filler panel retainers into the I/P lower trim panel openings.

Notice: Refer to Fastener Notice in Service Precautions.

4. Install the steering column filler panel bolts.

Tighten the bolts to 2 N.m (18 lb in).

5. Install the left I/P insulator retainers to the lower I/P trim pad.
6. Install the I/P fuse block access hole cover.