Rear Suspension

STABILIZER SHAFT INSULATOR REPLACEMENT

REMOVAL PROCEDURE




1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the bolt from the stabilizer shaft insulator bracket (3).
3. Remove the stabilizer shaft insulator bracket.
4. Remove the stabilizer shaft insulator (2) from the stabilizer shaft.

INSTALLATION PROCEDURE




1. Install the stabilizer shaft insulator (2) to the stabilizer shaft.
2. Install the stabilizer shaft insulator bracket (3).
3. Install the stabilizer shaft bracket bolts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the bolts to 48 N.m (35 lb ft).

4. Lower the vehicle.