Replacement procedure

BATTERY NEGATIVE CABLE REPLACEMENT

REMOVAL PROCEDURE
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the rear battery cover bolts and cover.
3. Disconnect the negative battery cable.
4. Remove the nut on right side frame rail retaining negative battery cable.
5. Remove the negative battery cable from vehicle.

INSTALLATION PROCEDURE
1. Install the negative battery cable to vehicle.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the nut to retain the negative battery cable to the right side frame rail.

Tighten
Tighten nut to 25 N.m (18 lb ft).

3. Connect the negative battery cable.
4. Install the rear battery cover and nuts.

Tighten
Tighten nuts to 10 N.m (89 lb in).

5. Lower the vehicle.