Removal and Replacement

Door Lock Switch Replacement

Removal Procedure




1. If the power door lock switch is located in the door trim panel release the retaining tabs using a flat-bladed tool.
Remove the switch from the door trim panel.
2. If the power door lock switch is located in the door handle bezel remove the bezel from the door trim panel.
3. Disconnect the electrical connector (2) from the power door lock switch (1).
4. With the flat-bladed tool release the retaining tabs for the door lock switch on the trim bezel.
5. Remove the power door lock switch (1) from the trim bezel.

Installation Procedure




1. Install the power door lock switch (1) to the trim bezel.
Press the switch into the trim bezel until retainers are fully engaged.
2. Connect the electrical connector (2) to the power door lock switch (1).
3. If the power door lock switch is located in the door handle bezel install the bezel to the door trim panel.
4. If the power door lock switch is located in the door trim panel install the switch into the trim panel.
Press the switch into the door trim panel until retaining tabs are fully engaged.