Child Restraint: Service and Repair

BRACKET REPLACEMENT - CHILD SEAT BELT RESTRAINT SYSTEM

REMOVAL PROCEDURE




1. Remove the rear seat cushion.
2. Remove the split folding rear seat back.
3. Remove the bolts (2) from the child seat latch bracket (1).
4. Remove the bracket (1) from the vehicle.

INSTALLATION PROCEDURE




1. Position the bracket (1) in the vehicle.
2. Install the child seat latch bracket bolts (2).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the bolts to 26 N.m (19 lb ft).

3. Install the split folding rear seat back.
4. Install the rear seat cushion.