Head Restraint Replacement - Front Seat
HEAD RESTRAINT REPLACEMENT - FRONT SEATREMOVAL PROCEDURE
1. Raise the head restraint to the highest position.
2. Remove the seat belt strap from the guide, if required.
3. Insert a small flat-bladed tool onto the tab on the side of the guides. Press in one tab at a time while slightly pulling up on that side.
4. Remove the head restraint by pulling upward and out.
INSTALLATION PROCEDURE
1. Position the head restraint to the guides in the seat back.
2. Install the head restraint. Press down until the restraint stops at the detent.
3. Reposition the head restraint to the original position.
4. Install the seat belt strap to the guide, if required.