Seat Back Recliner Cable Replacement - Front
SEAT BACK RECLINER CABLE REPLACEMENT - FRONTREMOVAL PROCEDURE
1. Remove the front bucket seat.
2. Adjust the seat cushion cover and pad in order to access the seat back recliner cable. Refer to Seat Cushion Cover Replacement - Front.
3. On the outer recliner perform the following steps:
1. Remove the cable conduit bracket bolt (3).
2. Rotate the cable conduit 90 degrees.
3. Remove the cable end (2) from the recliner (1).
4. On the inner recliner, perform the following steps:
1. Remove the cable conduit (2) from the retainer in the recliner.
2. Rotate the cable 90 degrees.
3. Remove the cable end (1) from the recliner (3).
5. Remove the seat back recliner cable from the front seat frame.
INSTALLATION PROCEDURE
1. Position the seat back recliner cable to the seat frame.
2. On the inner recliner, perform the following steps:
1. Install the cable end (1) to the recliner (3).
2. Rotate the cable 90 degrees.
3. Install the cable conduit to the retainer in the recliner (3).
3. On the outer recliner, perform the following steps:
NOTE: Refer to Fastener Notice in Service Precautions.
1. Install the cable end (2) to the recliner.
2. Rotate the cable conduit 90 degrees.
3. Install the cable conduit bracket bolt (3).
Tighten the bolt to 5 N.m (44 lb in).
4. Adjust the seat cushion cover and pad to a desired appearance. Refer to Seat Cushion Cover Replacement - Front.
5. Install the front bucket seat.