Cabin Temperature Sensor / Switch: Service and Repair

INSIDE AIR TEMPERATURE SENSOR REPLACEMENT







REMOVAL PROCEDURE
1. Remove the center instrument panel accessory trim plate.
2. Remove the driver knee bolster trim panel.
3. Carefully depress the sensor retaining tabs and remove the inside air temperature sensor from the driver knee bolster trim panel.







INSTALLATION PROCEDURE
1. Align the inside air temperature sensor to the driver knee bolster trim panel, then push to secure the retaining tabs.







2. Be sure to ALIGN the inside air temperature sensor with the inside air temperature sensor aspirator duct, while installing the driver knee bolster trim panel.

IMPORTANT: The inside air temperature sensor must be aligned with and fit into the end of the inside air temperature sensor aspirator duct.

3. Install the drivers knee bolster trim panel.
4. Install the I/P accessory trim plate.