Rear Camber Adjustment

Rear Camber Adjustment





1. Loosen the lower control arm cam bolt nuts.
2. Rotate the cam bolts to the required camber specification setting.

Notice: Refer to Fastener Notice in Service Precautions.

3. Maintain the camber setting while tightening the cam bolt nuts.
- Tighten the rear lower control arm (front) bolt nut to 145 Nm (107 ft. lbs.).
- Tighten the rear lower control arm (rear) bolt nut to 90 Nm (71 ft. lbs.).

Important: Check the toe setting AFTER changing camber or caster.

4. Check the camber setting after tightening. Adjust the camber setting if necessary.