Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2004 >> Impala V6-3.8L VIN K >> Repair and Diagnosis >> Wiper and Washer Systems >> Washer Fluid Level Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Washer Fluid Level Switch: Service and Repair

WASHER SOLVENT CONTAINER LEVEL SENSOR REPLACEMENT

REMOVAL PROCEDURE
1. Drain the washer solvent from the washer solvent container.
2. Remove the right front fender liner.




3. Disconnect the washer solvent container level sensor electrical connector.
4. Using a small flat-bladed tool, remove the washer solvent level sensor from the washer solvent container.
5. Using a small flat-bladed tool, remove the seal from the washer solvent container.

INSTALLATION PROCEDURE




1. Position the seal to the washer solvent container, pressing in until fully seated.
2. Position the washer solvent level sensor to the washer solvent container, pressing in until fully seated.
3. Connect the washer solvent level sensor electrical connector.
4. Install the right front fender liner.
5. Fill the washer solvent container with washer solvent.
pro multis · About Operation CHARM