Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
113. Intake Manifold Installation - Right
Intake Manifold Installation - Right
1. Apply a 2-3 mm wide by 0.5-1.5 mm high bead of P/N 97720043 sealant on the intake manifold mating surface.
2. Install the intake manifold.
Right:
3. Notice:
Refer to Fastener Notice in Service Precautions.
Install the intake manifold bolts and nuts.
^ Tighten the intake manifold bolts and nuts to 21 Nm (15 ft. lbs.).