Auxiliary Power Outlet: Service and Repair

ACCESSORY POWER RECEPTACLE REPLACEMENT - 12 VOLT

REMOVAL PROCEDURE




1. Remove the rear floor console.
2. Disconnect the 12-volt power supply electrical connectors (1).




3. Unscrew the retaining nut (2) from the 12-volt power supply (1).




4. Remove the 12-volt power supply (1) from the bezel (2).
5. Remove the bezel (2) from the rear floor console, if necessary.

INSTALLATION PROCEDURE




1. Install the bezel (2) to the rear floor console, if removed.
2. Install the 12-volt power supply (1) to the bezel (2).




3. Install the retainer nut (2) to the 12-volt power supply (1).




4. Connect the 12-volt power supply electrical connectors (1).
5. Install the rear floor console.