Sliding Door Window Glass: Service and Repair

Window Replacement - Sliding Door Swing Out

Removal Procedure

1. Remove the sliding door garnish molding. Refer to Garnish Molding Replacement - Sliding Door (Garnish Molding Replacement - Sliding Door) in Interior Trim.




2. Use a small flat-bladed tool in order to remove the plugs from the swing-out window access hole on the sliding door.




3. Remove the swing-out window latch screws.
4. Remove the stud nuts from the swing-out window hinge.




5. Remove the swing-out window from the sliding door.



Installation Procedure





1. Install the swing-out window to the sliding door.





Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the studs nuts to the swing-out window hinge.

Tighten the nuts to 10 N.m (89 lb in).

3. Install the swing-out window latch screws.

Tighten the screws to 10 N.m (89 lb in).





4. Press the plugs into the swing-out window access hole on the sliding door until fully seated.
5. Install the sliding door garnish molding. Refer to Garnish Molding Replacement - Sliding Door (Garnish Molding Replacement - Sliding Door) in Interior Trim.