Seat Cushion Frame Replacement - Rear (With RPO Code YC7)

SEAT CUSHION FRAME REPLACEMENT - REAR (WITH RPO CODE YC7)

REMOVAL PROCEDURE
1. Remove the rear bench seat from the vehicle.
2. Remove the seat cushion cover and pad.




3. Remove the bolts retaining the seat back hinges to the seat cushion frame.

IMPORTANT: Note the position and length of the bolts removed. This will assist with reassembly.

4. Remove the bolts retaining the console to the seat cushion frame.

IMPORTANT: Note the position and length of the bolts removed. This will assist with reassembly.




5. Remove the seat cushion frame.

INSTALLATION PROCEDURE




1. Install the seat cushion frame.
2. Install the bolts that retain the console to the seat cushion frame in the locations noted during disassembly.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolts that retain the console to the seat cushion frame to 30 Nm (22 lb ft).




3. Install the bolts that retain the seat back hinges to the seat cushion frame in the locations noted during disassembly.

Tighten the bolts that retain the seat back hinges to the bench seat cushion frame to 30 Nm (22 lb ft).

4. Install the seat cushion cover and pad.
5. Install the rear bench seat to the vehicle.