Removal and Replacement

Driver Information Center Module Replacement

Removal Procedure





1. Remove the overhead console (3). Refer to Console Replacement - Overhead (Console Replacement - Overhead) .
2. Remove the display lens and the switch plate (1).
3. Disconnect the electrical connectors.
4. Remove the temperature/compass electronic display module (2).



Installation Procedure





1. Install the temperature/compass electronic display module (2).
2. Connect the electrical connectors.
3. Install the display lens and the switch plate (1).
4. Install the overhead console (3). Refer to Console Replacement - Overhead (Console Replacement - Overhead) .
5. Recalibrate the compass. Refer to Electronic Compass Calibration (Compass) .