Throttle Cable/Linkage: Service and Repair

ACCELERATOR CONTROLS CABLE REPLACEMENT

REMOVAL PROCEDURE
1. Remove the engine cover.
2. Remove the air cleaner outlet duct.




3. Remove the accelerator cable from the throttle lever.




4. Remove the accelerator cable from the engine cable bracket.




5. Remove the accelerator cable (1) from the accelerator pedal (3).




6. Remove the accelerator cable assembly from the bulkhead (1).

INSTALLATION PROCEDURE




1. Install the accelerator cable to the bulkhead (1).
- Ensure all locking tabs (3) are expanded to secure cable assembly to dash panel (1).
- Ensure dash panel insulator does not come in contact with any portion of the cable.




2. Install the accelerator cable (1) to the accelerator pedal (3). Ensure the retainer (2) is securely seated to the accelerator pedal.




3. Install the accelerator cable to the engine cable bracket.




4. Install the accelerator cable to the throttle lever.
5. Install the air cleaner outlet duct.
6. Install the engine cover.