Pinion Bearing Cup Installation

Pinion Bearing Cup Installation

^ Tools Required
- J 33837 Pinion Bearing Cup Remover and Installer





1. Install the left differential carrier case into the J 33837. Tighten the attaching bolts securely.
2. Install the J 33837-3.
3. Install the J 33837-4 onto the J 33837-3.
4. Install the outer pinion bearing cup onto the differential carrier case.
5. Install the outer pinion bearing cup by holding the J 33837-3 and turning the nut sleeve of the J 33837-1 counterclockwise in order to push the outer pinion bearing cup into place.





6. Install the inner pinion bearing cup into the differential carrier case opening.
7. Place the J 33837-4 in the inner pinion bearing cup.
8. Extend the J 33837-3 through the pinion bearing cup bore.
9. Install the J 33837-4 onto the J 33837-3.
10. Seat the inner bearing cup by holding the J 33837-3 and turning the nut sleeve of the J 33837-1 clockwise until the J 33837-4 is snug against the inner pinion bearing cup.
Rotate the J 33837-4 several times in order to ensure the inner pinion bearing cup is not cocked in the bore.
11. Install the inner bearing cup by holding the J 33837-3 and turning the nut sleeve of the J 33837-1 clockwise in order to pull the inner pinion bearing cup into place.